Whitworth Fine Thread DIN LON 282, 12 TPI

Attention!

Please do not mistake this thread for the Whitworth Fine Thread BS 84. This thread is an old one which is not used anymore. The nominal diameter and the pitch are mentioned in millimeters or in TPI.
Used in locomotive construction approx. until 1975.
The thread angle is 55°.

Diameter for bolt and nut
Thread Size Tapping Drill Size
mm		 Core Area
cm2		 TPI Pitch
mm
W 23 x 1/12" 20.29 3.23 12 2.117
W 26 x 1/12" 23.29 4.26 12 2.117
(W 28 x 1/12") 25.29 5.02 12 2.117
W 30 x 1/12" 27.29 5.85 12 2.117
(W 32 x 1/12") 28.29 5.74 12 2.117
W 33 x 1/12" 30.29 7.21 12 2.117
W 34 x 1/12" 31.29 7.69 12 2.117
W 36 x 1/12" 33.29 8.70 12 2.117
W 37 x 1/12" 34.29 9.23 12 2.117
W 39 x 1/12" 36.29 10.33 12 2.117
W 40 x 1/12" 37.29 10.92 12 2.117
(W 42 x 1/12") 39.29 12.12 12 2.117
(W 43 x 1/12") 40.29 12.75 12 2.117
(W 46 x 1/12") 43.29 14.72 12 2.117

Anzeige: